Saturday, February 5, 2011
How to setup PPTP VPN server using pfSense
10:22 AM | 
Posted by
Mark Gagalac
Login to your pfSense administration panel and configure the VPN PPTP.
go to VPN > PPTP > Configuration
Tick the radio button "Enable PPTP server"
Enter the Server address (Enter the Public IP address the PPTP server should use on its side for all clients.)
Enter the Remote address range. (eg. 10.22.20.0/28)
Click Save
Add a Firewall Rule.
go to Firewall > Rules
Allow it all or block some ports and protocols. Mine is allow all.
Add Users
go to VPN > PPTP > Users
Enter the Username and Password aswell as the IP. Make sure that its covered under the Remote address range that was setup in your configuration. (eg. 10.22.20.22)
Following this, you should have a working PPTP VPN server working.
go to VPN > PPTP > Configuration
Tick the radio button "Enable PPTP server"
Enter the Server address (Enter the Public IP address the PPTP server should use on its side for all clients.)
Enter the Remote address range. (eg. 10.22.20.0/28)
Click Save
Add a Firewall Rule.
go to Firewall > Rules
Allow it all or block some ports and protocols. Mine is allow all.
Add Users
go to VPN > PPTP > Users
Enter the Username and Password aswell as the IP. Make sure that its covered under the Remote address range that was setup in your configuration. (eg. 10.22.20.22)
Following this, you should have a working PPTP VPN server working.
Labels:
Subscribe to:
Post Comments (Atom)
2 comments:
Explain how this protocole is weak.
From when this protocole is weak
Useful information on vpn server. Couple of weeks ago, I availed the services of a reputed china vpn service provider and they provided excellent service along with vpn server software. The speed is good and services are uninterrupted.
Post a Comment